调直机正常情况下，可以将弯曲的钢管调直到≤3°的效果，出现钢管调不直或效果不理想，是怎么回事？我们该怎么解决呢？下面我们来看看原因出在哪里。
Effect of straightening machine, bending the pipe until less than or equal to 3 degrees, steel pipe not straight or effect is not ideal, how be to return a responsibility? How can we solve it? Let's see where the reason is.
钢管调直机可以对直径是48-50的钢管，如果钢管低于这个规格，那么在调直时就会出现调直效果不好，或者根据就调不直的情况。
Tube straightening machine can be 48-50 diameter of the steel pipe, if the steel tube below the specification, then the adjustment will appear straight effect is not good, or according to the situation of the adjustment is not straight.
如果钢管的直径符合，还是有调不直的情况，我们可以先将滚轮的调整丝松开，将钢管放进钢管调直机内，然后从最后面开始向前逐一将调整丝拧紧，滚轮刚好压住钢管即可，不可压的过紧，否则可能会损伤到钢管。如果调直效果还是不好，再将调整丝稍微拧点即可。
If you comply with the diameter of the steel tube, or the adjustment is not straight, we can first roller adjustment screw loose, the pipe into the steel pipe straightening machine, then from the back started forward one by one the adjustment screw tightening, roller just pressed steel can be incompressible tight, otherwise may be damage to the pipe. If the straightening effect is not good, then adjust the wire a little twist can be.
钢管的直径大小多少会有些偏差，如果在使用钢管调直机时出现调直效果不好，就采用上面的方法对机器进行调整。如果您在使用时遇到其它难题，可以随时与我们联系。
The diameter of the steel pipe will be somewhat deviation, if the use of steel tube straightening machine when the adjustment effect is not good, on the use of the above method to adjust the machine. If you encounter other problems in use, you can contact us at any time.